Top of the page

Pump - Rule AUTO 800 12v

Item No. RWB0809
12 volt 800 GPH 3.4 amp Automatic. RULE Model 20SA Next generation compact submersible 800 GPH Automatic Sensing electric bilge pump - no fl oat switch required. Totally submersible pump with water cooled, ignition and TCO protected motor, stainless steel shaft and snap-on strainer base. These pumps

Description

12 volt 800 GPH 3.4 amp Automatic. RULE Model 20SA

Next generation compact submersible 800 GPH Automatic Sensing electric bilge pump - no fl oat switch required. Totally submersible pump with water cooled, ignition and TCO protected motor, stainless steel shaft and snap-on strainer base. These pumps are extremely effi cient, draw low current and offers high capacity output in a very compact housing, to fi t into the smallest available space. Please note - using the included check valve will reduce the output fl ow of the pump. Consumes 0.20 amps per day. 12 or 24 volt DC only - Cannot be run through 240v transformers. Available in both 12 & 24V models.

3 year limited warranty.
  • Fully submersible pump - 800 US gallons per hour - 50 litres per minute
  • Higher fl ow - optimised impeller to provide greater fl ow at the same amperage as previous model
  • High effi ciency, low amp draw ignition protected motor includes true Electromagnetic suppression (EMC)
  • 16 gauge tin coated copper electrical wiring with silicone infused water blocking feature - to stop water wicking down inside the wiring
  • Built-In thermal cut-out (TCO) in the motor provides additional protection for pump & vessel
  • Backfl ow prevention - now includes a removable check valve in the discharge nozzle which reduces the amount of water draining back from the pump discharge hose into the bilge.
  • Please note - using the check valve will reduce the rated output fl ow.
  • Threaded discharge port - gives easier installation and maintenance. Discharge hose port is included with each pump
  • Hidden air vents in the pump prevent air locking in challenging plumbing installations and helps with the check valve operation
  • Compact - 120mm Height x 74mm Width x 64mm depth - not incl. discharge
  • 3.4 amp draw @ 12v DC. Consumes only 0.20 amps per day.
  • Threaded hose outlet suits 20mm (3/4") hose

Specifications

Item Category Code
Bilge Pumps
Recommended Retail Price
280
catalogue page number
278

Reviews (0)

There are no reviews yet.

Pump - Rule AUTO 800 12v

Item No. RWB0809
12 volt 800 GPH 3.4 amp Automatic. RULE Model 20SA Next generation compact submersible 800 GPH Automatic Sensing electric bilge pump - no fl oat switch required. Totally submersible pump with water cooled, ignition and TCO protected motor, stainless steel shaft and snap-on strainer base. These pumps

Description

12 volt 800 GPH 3.4 amp Automatic. RULE Model 20SA

Next generation compact submersible 800 GPH Automatic Sensing electric bilge pump - no fl oat switch required. Totally submersible pump with water cooled, ignition and TCO protected motor, stainless steel shaft and snap-on strainer base. These pumps are extremely effi cient, draw low current and offers high capacity output in a very compact housing, to fi t into the smallest available space. Please note - using the included check valve will reduce the output fl ow of the pump. Consumes 0.20 amps per day. 12 or 24 volt DC only - Cannot be run through 240v transformers. Available in both 12 & 24V models.

3 year limited warranty.
  • Fully submersible pump - 800 US gallons per hour - 50 litres per minute
  • Higher fl ow - optimised impeller to provide greater fl ow at the same amperage as previous model
  • High effi ciency, low amp draw ignition protected motor includes true Electromagnetic suppression (EMC)
  • 16 gauge tin coated copper electrical wiring with silicone infused water blocking feature - to stop water wicking down inside the wiring
  • Built-In thermal cut-out (TCO) in the motor provides additional protection for pump & vessel
  • Backfl ow prevention - now includes a removable check valve in the discharge nozzle which reduces the amount of water draining back from the pump discharge hose into the bilge.
  • Please note - using the check valve will reduce the rated output fl ow.
  • Threaded discharge port - gives easier installation and maintenance. Discharge hose port is included with each pump
  • Hidden air vents in the pump prevent air locking in challenging plumbing installations and helps with the check valve operation
  • Compact - 120mm Height x 74mm Width x 64mm depth - not incl. discharge
  • 3.4 amp draw @ 12v DC. Consumes only 0.20 amps per day.
  • Threaded hose outlet suits 20mm (3/4") hose

Specifications

Item Category Code
Bilge Pumps
Recommended Retail Price
280
catalogue page number
278

Reviews (0)

There are no reviews yet.