Jabsco Ultra Max 12v Fresh Water Press Sys 13lpm
Item No. J0020-122
Loading
12 volt Ultra-Max JABSCO 59451-1012 Fully assembled, wired and plumbed ready for use - simplifi es installation for both the professional and amateur installer. Par-Max 3.5 automatic fresh water pressure pump provides up to 13.2 litres per minute fl ow which will adequately serve 3 x 12mm (1/2") out
Description
12 volt Ultra-Max JABSCO 59451-1012
Fully assembled, wired and plumbed ready for use - simplifi es installation for both the professional and amateur installer. Par-Max 3.5 automatic fresh water pressure pump provides up to 13.2 litres per minute fl ow which will adequately serve 3 x 12mm (1/2") outlets in standard installations.
The Ultra-Max set consists of a Par-Max 3.5 40PSI diaphragm pressure pump, pre-fi lter and 1 litre pressurized bladder accumulator tank, wired, plumbed and mounted on a sturdy plastic mounting board (322 x 328mm) with rubber feet. Simple one-step electrical connection and snap-in ports for connection to 12mm (1/2") I.D hose.
Fully assembled, wired and plumbed ready for use - simplifi es installation for both the professional and amateur installer. Par-Max 3.5 automatic fresh water pressure pump provides up to 13.2 litres per minute fl ow which will adequately serve 3 x 12mm (1/2") outlets in standard installations.
- Fully mounted pump system provides up to 13.2 litres per minute fl ow
- Diaphragm pump gives smooth and quiet operation and dry run ability
- Includes solid plastic mounting board, accumulator tank, fi lter,
- plug-in hose ports, wiring connection studs all pre-fi tted
- Self primes to 3 metres
- Can be installed vertically or horizontally
- Ignition protected motor
- Thermal overload protection with auto re-start
- Pressure switch cuts in at 20PSI - cuts out at 40PSI
The Ultra-Max set consists of a Par-Max 3.5 40PSI diaphragm pressure pump, pre-fi lter and 1 litre pressurized bladder accumulator tank, wired, plumbed and mounted on a sturdy plastic mounting board (322 x 328mm) with rubber feet. Simple one-step electrical connection and snap-in ports for connection to 12mm (1/2") I.D hose.
Specifications
- Item Category Code
- Freshwater Pressure System
- Recommended Retail Price
- 1072
- catalogue page number
- 332
Reviews (0)
There are no reviews yet.
Loading
Jabsco Ultra Max 12v Fresh Water Press Sys 13lpm
Item No. J0020-122
12 volt Ultra-Max JABSCO 59451-1012 Fully assembled, wired and plumbed ready for use - simplifi es installation for both the professional and amateur installer. Par-Max 3.5 automatic fresh water pressure pump provides up to 13.2 litres per minute fl ow which will adequately serve 3 x 12mm (1/2") out
Description
12 volt Ultra-Max JABSCO 59451-1012
Fully assembled, wired and plumbed ready for use - simplifi es installation for both the professional and amateur installer. Par-Max 3.5 automatic fresh water pressure pump provides up to 13.2 litres per minute fl ow which will adequately serve 3 x 12mm (1/2") outlets in standard installations.
The Ultra-Max set consists of a Par-Max 3.5 40PSI diaphragm pressure pump, pre-fi lter and 1 litre pressurized bladder accumulator tank, wired, plumbed and mounted on a sturdy plastic mounting board (322 x 328mm) with rubber feet. Simple one-step electrical connection and snap-in ports for connection to 12mm (1/2") I.D hose.
Fully assembled, wired and plumbed ready for use - simplifi es installation for both the professional and amateur installer. Par-Max 3.5 automatic fresh water pressure pump provides up to 13.2 litres per minute fl ow which will adequately serve 3 x 12mm (1/2") outlets in standard installations.
- Fully mounted pump system provides up to 13.2 litres per minute fl ow
- Diaphragm pump gives smooth and quiet operation and dry run ability
- Includes solid plastic mounting board, accumulator tank, fi lter,
- plug-in hose ports, wiring connection studs all pre-fi tted
- Self primes to 3 metres
- Can be installed vertically or horizontally
- Ignition protected motor
- Thermal overload protection with auto re-start
- Pressure switch cuts in at 20PSI - cuts out at 40PSI
The Ultra-Max set consists of a Par-Max 3.5 40PSI diaphragm pressure pump, pre-fi lter and 1 litre pressurized bladder accumulator tank, wired, plumbed and mounted on a sturdy plastic mounting board (322 x 328mm) with rubber feet. Simple one-step electrical connection and snap-in ports for connection to 12mm (1/2") I.D hose.
Specifications
- Item Category Code
- Freshwater Pressure System
- Recommended Retail Price
- 1072
- catalogue page number
- 332
Reviews (0)
There are no reviews yet.