Top of the page

Pump - Rule 1100GPH 24v

Item No. RWB0806
24 volt 1100 GPH 1.9 amp. RULE Model 27DA-24 Next generation compact, high capacity 1100 GPH submersible electric bilge pumps. Totally submersible pump with water cooled, ignition and TCO protected motor, stainless steel shaft and snap-on strainer base. These pumps are extremely efficient, draw low

Description

24 volt 1100 GPH 1.9 amp. RULE Model 27DA-24

Next generation compact, high capacity 1100 GPH submersible electric bilge pumps. Totally submersible pump with water cooled, ignition and TCO protected motor, stainless steel shaft and snap-on strainer base. These pumps are extremely efficient, draw low current and offer high capacity output in a very compact housing, to fit into the smallest available space. NON-Automatic pump - requires a Rule float switch to operate automatically. Please note - using the included check valve will reduce the output flow of the pump. Available in both 12 volt & 24 volt models.

3 year limited warranty.

  • Fully submersible pump - 1100 US gallons per hour - 69 litres per minute
  • Higher flow - optimised impeller to provide greater flow at the same amperage as previous model
  • High efficiency, low amp draw ignition protected motor includes true Electromagnetic suppression (EMC)
  • 16 gauge tin coated copper electrical wiring with silicone infused water blocking feature - to stop water wicking down inside the wiring
  • Built-In thermal cut-out (TCO) in the motor provides additional protection for pump & vessel
  • Backflow prevention - now includes a removable check valve in the discharge nozzle which reduces the amount of water draining back from the pump discharge hose into the bilge.
  • Please note - using the check valve will reduce the rated output flow.
  • Threaded discharge port - gives easier installation and maintenance.
  • Discharge hose port is included with each pump
  • Hidden air vents in the pump prevent air locking in challenging plumbing installations and helps with the check valve operation
  • Compact - 112mm Height x 74mm Width x 64mm depth - not including discharge
  • 3.7 amp draw @ 12v DC. 1.9 amp draw @ 24v DC
  • Straight threaded hose outlets for both 25mm (1) and 28mm (1 1/8) hose

Specifications

Item Category Code
Bilge Pumps
Recommended Retail Price
175
catalogue page number
270

Reviews (0)

There are no reviews yet.

Pump - Rule 1100GPH 24v

Item No. RWB0806
24 volt 1100 GPH 1.9 amp. RULE Model 27DA-24 Next generation compact, high capacity 1100 GPH submersible electric bilge pumps. Totally submersible pump with water cooled, ignition and TCO protected motor, stainless steel shaft and snap-on strainer base. These pumps are extremely efficient, draw low

Description

24 volt 1100 GPH 1.9 amp. RULE Model 27DA-24

Next generation compact, high capacity 1100 GPH submersible electric bilge pumps. Totally submersible pump with water cooled, ignition and TCO protected motor, stainless steel shaft and snap-on strainer base. These pumps are extremely efficient, draw low current and offer high capacity output in a very compact housing, to fit into the smallest available space. NON-Automatic pump - requires a Rule float switch to operate automatically. Please note - using the included check valve will reduce the output flow of the pump. Available in both 12 volt & 24 volt models.

3 year limited warranty.

  • Fully submersible pump - 1100 US gallons per hour - 69 litres per minute
  • Higher flow - optimised impeller to provide greater flow at the same amperage as previous model
  • High efficiency, low amp draw ignition protected motor includes true Electromagnetic suppression (EMC)
  • 16 gauge tin coated copper electrical wiring with silicone infused water blocking feature - to stop water wicking down inside the wiring
  • Built-In thermal cut-out (TCO) in the motor provides additional protection for pump & vessel
  • Backflow prevention - now includes a removable check valve in the discharge nozzle which reduces the amount of water draining back from the pump discharge hose into the bilge.
  • Please note - using the check valve will reduce the rated output flow.
  • Threaded discharge port - gives easier installation and maintenance.
  • Discharge hose port is included with each pump
  • Hidden air vents in the pump prevent air locking in challenging plumbing installations and helps with the check valve operation
  • Compact - 112mm Height x 74mm Width x 64mm depth - not including discharge
  • 3.7 amp draw @ 12v DC. 1.9 amp draw @ 24v DC
  • Straight threaded hose outlets for both 25mm (1) and 28mm (1 1/8) hose

Specifications

Item Category Code
Bilge Pumps
Recommended Retail Price
175
catalogue page number
270

Reviews (0)

There are no reviews yet.