12 volt 500 GPH 1.6 amp Automatic. RULE Model 25SA

Next generation compact submersible 500 GPH Automatic Sensing electric bilge pump - no fl oat switch required. Totally submersible pump with water cooled, ignition and TCO protected motor, stainless steel shaft and snap-on strainer base.

These pumps are extremely effi cient, draw low current and offers high capacity output in a very compact housing, to fi t into the smallest available space.

Please note - using the included check valve will reduce the output fl ow of the pump. Consumes 0.20 amps per day. 12 or 24 volt DC only - Cannot be run through 240v transformers. Available in both 12 & 24V models.

3 year limited warranty.

• Fully submersible pump - 500 US gallons per hour - 31 litres per minute
• Higher fl ow - optimised impeller to provide greater fl ow at the same amperage as previous model
• High effi ciency, low amp draw ignition protected motor includes true Electromagnetic suppression (EMC)
• 16 gauge tin coated copper electrical wiring with silicone infused water blocking feature - to stop water wicking down inside the wiring
• Built-In thermal cut-out (TCO) in the motor provides additional protection for pump & vessel
• Backfl ow prevention - now includes a removable check valve in the discharge nozzle which reduces the amount of water draining back from the pump discharge hose into the bilge.
• Please note - using the check valve will reduce the rated output fl ow.
• Threaded discharge port - gives easier installation and maintenance. Discharge hose port is included with each pump
• Hidden air vents in the pump prevent air locking in challenging plumbing installations and helps with the check valve operation
• Compact - 107mm Height x 74mm width x 64mm depth - not including discharge
• 1.6 amp draw @ 12v. 0.8 amp draw @ 24v. Consumes only 0.2 amps per day.
• Threaded hose outlet suits 20mm (3/4") hose